Description
High-quality heavy-duty folding bracket with SUS304 stainless steel damper (AISI304 or V2A), 307 mm (12-3/32″), with load capacity up to 100 kg
Application:
These high-quality folding table supports made of solid stainless steel are ideal for damp and harsh environments and can be used in a variety of ways.
The folding consoles can be used in homes, offices, restaurants, hotels, etc.
One of the possible applications is the work surface extension in the kitchen or table extension.
They can also be used perfectly for the interior of motorhomes, caravans, boats, yachts and trains.
The flap supports are designed for hard use environments, but thanks to their classic industrial look they are also perfect for modern interiors.
These EB-303-DA folding table holders are also very suitable for use in a Tiny House or Micro Apartment to flexibly design space as needed.
A special feature of these folding brackets is that the flap support and flap hinge are combined in a single fitting.
The built-in soft-close damper ensures that the flap closes gently. For lighter flaps, you can install a flap support without dampers.
When the flap is folded, it is locked in place by pressing on the surface if necessary. Thus, the folding table in the caravan or boat remains in the closed position even while driving, does not wobble and does not produce noise.
When the folding table holder is opened, it automatically locks in the upper position and can be loaded.
To fold the folding table again, both levers on the left and right must be operated at the same time. This ensures that the flap support is not accidentally folded.
The release lever of the folding angles is extra long to facilitate gripping.
The folding brackets are made of corrosion-resistant stainless steel.
The surfaces are elaborately processed, so that the fittings look very high-quality.
Assembly:
Mounting is done with screws.
The maximum load can be achieved by distributing the load so that the center of gravity is in the middle (
s. Fig.
).
If the center of gravity of the flap is at the edge of the folding table holder, the load capacity is 75 kg.
Attention: the wall must be suitable to bear the required load.
The rear panel of the folding brackets is rounded, so that they can be mounted not only on straight surfaces, but also on tubes (⌀25 mm).
From the
Picture below
you can see when one and when two dampers are needed.
If the flap is too narrow, the flap table holders can alternatively be mounted in reverse.
In this case, the longer side is mounted on the wall and the shorter side is used for the folding table or shelf.
This has no negative effect on the load (
s. Fig.
).
Features:
- Load capacity in the center: 495 N (50 kp) for 1 folding angle
- Torque: 230 Nm
- Weight: 500 g
- Longer release lever
- Ambient temperature: from -30 °C to +120 °C
- Endurance test: 50,000 cycles passed
Included in delivery:
- 1 piece SUS304 stainless steel folding table support (AISI304 or V2A)
- This item does not include mounting screws
Material:
- Made of high quality stainless steel SUS304 (AISI304, V2A)
Surface:
- Stainless steel electric polished
Dimensions:
- Length: 307 mm (12-3/32″)
- Height: 165 mm (6-1/2″)
- Width: 29 mm (1-5/32″)
- Radius rear panel: ⌀25 mm (31/32″)
For dimensions see technical drawing (mm):
Watch product video:
Manufacturer’s reference number:
- Item number: 120-048-775, 907260
- Product name: EB-303-DA, old: EB-303/EP-D
- EAN number: 4510932219853
Manufacturer: ROCA Industry (Sweden)
Distributors: SUGATSUNE / LAMP® (Japan)
