Description
High-quality garage door handle, with fixed cylinder and two keys, made of solid die-cast zinc, surface: chrome-plated, for front mounting, 14.08.052-0, design: different-closing
Application:
Cross handle made of zamak for garage door and much more.
The cross handle 14.08.052-0 is suitable for most garage doors and garages.
To close the garage door handle 14.08.052-0, the handle must be turned 90 degrees, and then the key must be rotated 180 degrees.
If necessary, the cross handle 14.08.052-0 can also be blocked with the key in the open position, e.g. to avoid unwanted locking of the gate.
The cross handle has a fixed pin cylinder.
No need to lock: the key can be removed in the open and closed position.
The high-quality garage door handles 14.08.052-0 have a simple and robust design and are ideal for:
- Locker
- Locker
- Metal cabinet
- Sheet metal housing
- Cabinet door
- Ash pan
- Container
- Vehicle
- Motorhome
- Garage door
Material:
- The garage door handles 14.08.052-0 are made of solid die-cast zinc
Surface:
- Chrome-plated
Assembly:
- The cross handle 14.08.052-0 is for screwing
- The square is fastened and tightened in the cross handle with the square wrench included in the scope of delivery
- The mounting plate of the garage door handle 14.08.052-0 has two mounting holes with the drill hole spacing: 38 mm (1-1/2″)
Features:
- Design: different-closing
- Weight: 190 g
- Size: 99 mm (3.9″)
- high-quality
- square: 8 x 8 mm (5/16″)
- without compulsory closing
- Reversible key (key fits into the lock on both sides)
- Drill hole spacing: 38 mm (1-1/2″)
- with permanently mounted pin cylinder
- Cylindrical Shape: Round Cylinder
- Closing movement: 90 degrees
- 400 different key variants
- Chrome-plated
- Zamak
- Zinc die casting
- high brand quality of UMAXO®
For further dimensions and details see technical drawing .
The dimensions:
- Garage Door Handle Length: 3-57/64″ (99 mm)
- Mounting plate length: 60 mm (2-23/64″)
- Mounting plate width: 30 mm (1-3/16″)
- Drill hole spacing: 38 mm (1-1/2″)
- Square dimensions: 8 x 8 mm (5/16″)
- Square length: 127 mm (5″)
Included in delivery:
- 1 piece garage door handle 14.08.052-0 made of solid die-cast zinc, chrome-plated, with permanently mounted locking cylinder
- 1 piece square, 8 x 8 mm (5/16″), 127 mm (5″)
- 2 keys (reversible keys)
- 1 piece of fastening screw
- 1 piece washer
- 1 piece serrated washer
- 1 square wrench
Additional Information:
Manufacturer’s reference number:
- Article identification number: 14.08.052-0
- EAN Number: 5704866506052
Manufacturer: SISO Denmark
