Description
2 pieces of high-quality heavy-duty folding brackets made of stainless steel SUS304 (V2A or AISI304), with load capacity up to 175 kg
Application:
These high-quality folding table supports made of solid stainless steel are ideal for damp and harsh environments and can be used in a variety of ways.
The folding consoles can be used in homes, offices, restaurants, hotels, etc.
One of the possible applications is the extension of the work surface in the kitchen.
They can also be used perfectly for the interior of motorhomes, caravans, boats, yachts and trains.
The flap supports are designed for hard use environments, but thanks to their classic industrial look they are also perfect for modern interiors.
These EB-200 folding table holders are also very suitable for use in a tiny house or micro apartment to flexibly design space as needed.
A special feature of these folding brackets is that the flap support and flap hinge are combined in a single fitting.
When the flap is folded, it is locked in place by pressing on the surface if necessary. Thus, the folding table in the caravan or boat remains in the closed position even while driving, does not wobble and does not produce noise.
When the folding table holder is opened, it automatically locks in the upper position and can be loaded.
To fold the folding table again, both levers on the left and right must be operated at the same time. This ensures that the flap support is not accidentally folded.
The release lever of the folding angles is extra long to facilitate gripping.
The folding brackets are made of corrosion-resistant stainless steel and are available uncoated and black coated, depending on your choice.
The surfaces are elaborately processed, so that the fittings look very high-quality.
Assembly:
Mounting is done with appropriate screws.
The maximum load capacity can be achieved by distributing the load so that the centre of gravity is in the middle (see figure).
When the center of gravity of the flap is at the edge of the folding table holder, the load capacity is 90 kg.
Attention: The screws as well as the wall must be suitable to bear the required load.
The rear panel of the folding brackets is rounded, so that they can be mounted not only on straight surfaces, but also on tubes (⌀25 mm).
If the flap is too narrow for the folding consoles, the folding brackets can also be mounted in reverse as an alternative.
In this case, the longer side is mounted on the wall and the shorter side is used for the folding table or shelf.
This has no negative effect on the load (
s. Fig.
).
Features:
- Load capacity in the center: 555 N (56 kp) for 1 folding angle
- Torque: 170 Nm
- Weight: 332 g
- Longer release lever
Included in delivery:
- Two SUS304 stainless steel folding table supports (V2A and AISI304 respectively)
Material:
- Made of high quality stainless steel SUS304 (AISI304, V2A)
Surface:
- Stainless steel electric polished
- Stainless steel black coated (Heat Black Oxidation, HBO)
Dimensions:
- Length: 201 mm
- Height: 116 mm
- Width: 29 mm
- Radius rear wall: ⌀25 mm
For dimensions see technical drawing (mm):
Watch product video:
Manufacturer’s reference number:
| Polished stainless steel: | 120-039-843, old: 120-041-277 | EB-200, former: EB-200/EP |
| Black coated stainless steel: | 120-048-895 | EB-200-BL, former: EB-200/EP-BK |
Manufacturer: ROCA Industry (Sweden)
Distributors: SUGATSUNE / LAMP® (Japan)
