Description
High-quality heavy-duty folding console with stainless steel damper with increased payload up to 200 kg
Application:
These high-quality, heavy-duty folding table supports made of solid stainless steel are ideal for damp and harsh environments and can be used in a variety of ways.
The folding consoles can be used in homes, offices, restaurants, hotels, etc.
One of the possible applications is the kitchen worktop extension or table extension.
They can also be used perfectly for the interior of motorhomes, caravans, boats, yachts and trains.
The flap supports are designed for tough environments, but thanks to their classic industrial look, they are also perfect for modern interiors.
These EB-317-DA folding table holders are also very suitable for use in tiny houses or micro apartments to flexibly design space as required.
A special feature of these folding brackets is that the flap support and flap hinge are combined in one fitting.
The built-in soft-close damper ensures that the flap closes gently. For lighter flaps, you can install a flap support without a damper.
When the flap is folded, it is locked in place by pressing on the surface if necessary. This means that the folding table in the caravan or boat remains in a closed position even while driving, does not wobble and does not produce any noise.
When the folding table holder is opened, it automatically locks in the upper position and can be loaded.
To fold the folding table again, both levers on the left and right must be operated at the same time. This ensures that the flap support is not accidentally folded.
The release lever of the folding brackets is extra long to make it easier to grip.
The folding brackets are made of corrosion-resistant stainless steel.
The surfaces are elaborately finished, so the fittings look very high quality.
Assembly:
The assembly is done with screws.
The maximum load capacity can be achieved by distributing the load so that the centre of gravity is in the middle (see figure).
If the center of gravity of the flap is at the edge of the folding table holder, the load capacity is 100 kg.
Attention: The wall must be suitable for carrying the required load.
The back panel of the folding brackets is rounded, so that they can be mounted not only on straight surfaces, but also on tubes (⌀25 mm).
From the
Picture below
you can see when one and when two dampers are needed.
If the flap is narrow, the flap table holders can alternatively be mounted in reverse.
In this case, the longer side is mounted on the wall and the shorter side is used for the folding table or shelf.
This has no negative effect on the load (
s. Fig.
).
Features:
- Load capacity up to 200 kg when using 2 folding brackets
- Weight: 795 g
- Longer release lever
- Mounting holes: 6
- Ambient temperature: from −30 °C to +120 °C
- No additional hinges required
- Endurance test: 50,000 cycles passed
Included in delivery:
- 1 piece of SUS304 stainless steel folding table support (AISI304, 1.4301 or V2A)
- This item does not include mounting screws
Material:
- Made of high-quality SUS304 stainless steel (AISI304, V2A)
- Plastic (PA) cover
Surface:
- Stainless steel electrically polished
Dimensions:
- Length: 317 mm
- Height: 171 mm
- Width: 36 mm
- Radius of the back panel: 25 mm
For dimensions, see technical drawing (mm):
Watch product video:
Manufacturer’s reference number:
- Item number: 120-049-238, 907265
- Title: EB-317-DA
Manufacturer: ROCA Industry (Sweden)
Distributor: SUGATSUNE / LAMP® (Japan)
